Before you proceed with contacting customer service for claiming warranty for your drone, please follow the bullet points below for a faster transaction with us: Did you buy the product from one of our partner retailers? In order for us to help you with your warranty claim, it’s a pre-requisite that the purchase was done on one of our partner retailers. If this is the not the case, please refer to the store where you bought the product from for a warranty claim. Is the product still within 90 days from when it was purchased? Our standard warranty only covers the first 90 days from…

For more information about what you need before a warranty claim, please contact our customer service.

There are a number of factors that might be affecting your drone’s capability to sync with the controller. Please follow the bullet points below: Are there any other devices in the area which uses 2.4Ghz frequency as well? Check if there are other devices using the same frequency as the drone. It may cause interference, thus rendering the drone unable to sync. Have you fully-charged the drone/drone’s battery before attempting to sync? If the drone’s battery doesn’t have enough charge, it may affect syncing as well. Is there a mismatch between the drone and the controller’s FCC ID’s? Check both the drone’s and the controller’s FCC…

There are a couple of possible reasons why your drone is dropping mid-flight. Please follow the bullet points below: Have you fully-charged the drone/drone’s battery before attempting to sync? If the drone’s battery doesn’t have enough charge, it may affect syncing as well. Have you swapped out the controller’s batteries to fresh one’s? Nearly drained-out batteries may affect the syncing process. Try to swap the batteries out for fresh ones, and make sure they’re rated at 1.5v. How far did you fly the drone away from you? The range of flight might affect your drone’s connection with your controller. Please refer to the USER MANUAL for…

Please refer to the bullet points below for the factors that may be affecting your drone’s flight capability: Have you calibrated the drone on a flat surface? When calibrating the drone, make sure that you do it on a flat surface. Please refer to the USER MANUAL for the correct calibration process. Have you placed the propellers on their proper places? The propellers should have an embossed letter on each of them, which may either be A or B. This should match the motors’ letters as well. Please refer to the USER MANUAL for the correct propeller placement. Is there an obvious damage to the…

There might be a couple of reasons why your device is not able to detect the Wi-Fi access point of the drone. Please refer to the bullet points below: Are there any blinking lights on the drone’s camera? Please refer to the USER MANUAL with regards to the specific behaviour of the drone’s camera when it’s trying to broadcast the Wi-Fi access point. If there aren’t any lights on the drone’s camera, try to remove the camera (if possible) and re-attach it again. Make sure that the camera’s lens is pointing to the same direction as the drone’s front. Do you have a lot…

The correct application to download for your drone should be present on the USER MANUAL. Please refer to the drone’s USER MANUAL for this information. If you’re not able to find the app despite searching for it as per the USER MANUAL, please contact customer service.

Please confirm the following: Please make sure that you have connected to the drone’s Wi-Fi access point and downloaded the correct app for it. Check if your device’s memory is full. If your device’s memory is full, you won’t be able to save media from the drone. Please clear up some space on your device memory for the drone’s media. Have you viewed the photos/videos on the application first? If you haven’t done so, please view the media on the app first. Press the “Playback” Button on the app to view the media. If the troubleshooting steps above didn’t help with the app issue, please contact…

If the app is crashing/showing a black screen upon launching, it may be encountering some device issues: Have you tried to restart your device? Most of the time, restarting the device will clear up the app launching issues. Have you tried re-installing the app? If restarting your device doesn’t help with the issue, please uninstall/re-install the app on your device. Have you tried using another device for the app? Please see if you’re able to download and use the app on another device. Refer to the drone’s USER MANUAL for the system requirements of the app to make sure your device meets them. If the troubleshooting steps…

Fly-away drone incidents are not covered by our standard warranty. You may contact our customer service for more information regarding this.

There might be a couple of reasons why your drone is not flying as usual. Please refer to the bullet points below: Have you placed the drone’s propellers on their proper placements? Each propeller will have a letter embossed on it that matches the motors of the drone. Please refer to the drone’s USER MANUAL for the correct placement of propellers. Have you done the proper procedure on how to fly your drone? The drone’s USER MANUAL will have the complete step-by-step procedure from setting up your drone to flying it. Please refer to the USER MANUAL if you think you may have missed…

If the drone is powering on properly but is not following your commands properly/completely, there might be something wrong with the controller. Please refer to the bullet points below: Have you inserted fresh batteries on your controller? If you haven’t changed batteries on your controller, please do so and make sure they’re rated at 1.5v. Have you synced the drone and the controller properly? Before the drone follows your command, it needs to be synced to the controller properly. Please refer to the drone’s USER MANUAL for the complete step-by-step procedure on how to sync your drone to your controller. Have you fully-charged your drone? Moving…

The drone not powering on may not only be about its battery. Please refer to the bullet points below: Have you fully-charged the drone/drone’s battery? If the drone’s battery doesn’t have enough charge, it may not power on. Please refer to the drone’s USER MANUAL for the proper charging times/information. Is the battery working at all? Normally, our drones’ batteries come with a factory charge out-of-the-box. Using the factory charge, you will be able to power on the drone and fly it for some time. Is the charger/charging box/charging cable doing what it’s supposed to do while/after charging? Observe the charging indicator LED light. Please refer…

There may be a couple of factors on why your drone’s propellers are not spinning. Please refer to the bullet points below: Have you synced the drone and the controller properly? Without syncing the drone and the controller, the drone motors won’t spin. Please refer to the drone’s USER MANUAL for the proper procedure on how to sync the drone to the controller. Have you fully-charged the drone? If the drone isn’t charged enough, its lights will keep blinking even after syncing, thus the motors not being able to spin. Please charge the drone as the USER MANUAL’s instructions. Are there any foreign objects obstructing…

There are a number of factors that might be affecting your drone camera’s capability to shoot media. Please refer to the bullet points below: Have you synced the drone to the controller properly? If this is not the case, please refer to the drone’s USER MANUAL for the step-by-step procedure on how to sync your drone to the controller. Is the SD Card you’re trying to use on the drone camera larger than 16GB? Our drones’ cameras only support up to 16GB of storage capacity. If this is not the case, please use an SD card with a lower capacity. Have you formatted the SD…

Most of the time, if the RC Truck doesn’t move, it might have problems with the batteries. Have you installed fresh batteries on the controller? The batteries on the controller may be drained already. Try to change them to new/fresh ones and make sure they’re rated at 1.5v. Have you fully charged the RC truck battery? The RC Truck’s battery requires a certain amount of charge to turn on the truck. Please make sure that you fully charge the battery before use. If the troubleshooting steps above didn’t help with the power/battery issue, please contact our customer service.

If the truck doesn’t follow your commands properly on the controller, it might be a problem with the connection. Have you synced the truck and the remote correctly? Refer to the USER MANUAL for the proper procedure in syncing your truck and the remote. Are there any other RC Trucks in the area? If there are other RC Trucks in the area, they might be transmitting on the same radio frequency. Move to a new location where there are no other RC trucks present. If the troubleshooting steps above didn’t help with the syncing issue, please contact our customer service.

If the truck keeps cutting off from the remote, it might be due to your location, or the batteries. Are you using the RC truck in a small room, or indoors? If you’re trying to use the RC truck within a closed space, it may affect the connection. Move to a larger, open area or outdoors. Have you installed fresh batteries on the controller? The batteries on the controller may be drained already. Try to change them to new/fresh ones and make sure they’re rated at 1.5v. Have you fully charged the RC truck battery? The RC Truck’s battery requires a certain amount of charge to…

Usually, slow speeds may be due to your duration of use. Have you been driving the RC Truck at high speeds for long periods? If you have been driving the truck at high speeds for quite a while, it may case the motor to overheat. Turn off the truck for at least 10-15 minutes and resume. If the troubleshooting steps above didn’t help with the speed issue, please contact our customer service.